When you think about welding, the first thing that pops into your mind is probably not boots. However, talk to anyone who has experience doing welding, especially overhead welding, and they will tell you that having the best welding boots available is not an option, it is a must.
Anything that falls down can burn whatever it is that you are wearing, including your shoes. Good welding boots are going to protect the top of your feet, have high quality laces, and have a steel toe to protect against bumps and knocks that you might encounter as you’re in the workshop.
This guide is designed to help you pick the best welding boot possible. After reading this guide, you will have the basis for making a conscientious purchasing decision.
Our Top Welding Boots
Best Welding Boots Reviews
Timberland PRO Men’s 40000 Met Guard 6′ Steel Toe Boot
These boots are the perfect fit of fashion and function. They are attractive, comfortable boots that really get the job done.
They are made with your safety in mind. They will protect your feet from falling slag, and they have a metatarsal guard that has been able to withstand the impact of a 20 inch falling beam.
Laser welding boots that are designed to stand up to various conditions while keeping your feet comfortable.
- Steel Toed
- Impact Resistant
- Water Resistant
- Slip Resistant
- Synthetic Soles
- These Boots Are Ankle High
- Lightweight May Be a Drawback for Some
This is a quality boot that has a nice price. They are durable and provide a level of comfort and protection that you need while welding. One downside is their lifespan. You will probably need to replace them every year.
Dr. Martens Men’s Ironbridge MG ST Steel-Toe Met Guard Boot
These rugged welders boots are made from 100 percent pure leather. They have synthetic souls and a removable insole.
These boots are water resistant and slip resistant. They will keep you standing whether you are walking on oil, water, or grease. They are designed to completely protect your entire foot.
The rubber sole is nonconductive. It has a reinforced durable shank. The shoes not only last a long time, but they are comfortable on your feet.
The steel protection provided by the boot goes from your ankle to the toe. Even if a heavy object falls on your foot, you are completely protected.
- Comfortable Steel Toe Guard
- Durable, Long-Lasting
- Protects the Entire Foot
- Slip Proof and Water Resistant
- At 38 Ounces, These Boots Are Heavy
- Exposure to the Elements May Damage the Boot
- The Steel Toe Guard Is Only Available in Men’s Boots
This is a quality work men’s shoe. It offers amazing protection from hazards that accompany welding. The importance of comfort can be seen when you look at the design of the shoe. Many people say that they are the best welding boots they have ever owned.
Timberland PRO Men’s 53530 8″ Metguard Steel-Toe Boot
When you are looking for welding shoes, you want to pay special attention to the quality of the metatarsal guards since this is what is going to provide the greatest protection. In this regard, the Timberland Pro is a stellar boot.
The metatarsal guards on these boots are hinged, and they are asymmetrical. This means they protect all of your foot, regardless of if you are standing, bending, or squatting. They have been designed to adhere to the shape of your foot.
Many have commented that these boots are a lot more comfortable than they expected welding boots to be.
The boots feature steel toe caps, they are waterproof, and they are designed to protect you from impact and from heat. The rubber soles are protective from electricity.
- Offers Full Foot Protection
- Steel Toe Caps That Are Roomy
- Heat and Impact Protection
- These Boots Are Sturdy and Robust, but This Also Makes Them Heavy
- Stitching Starts to Come Apart after A Few Months
This is a nice welding boot. It has the quality and protection you’d expect from a name like Timberland. It is a little disheartening that some have complained about their boots falling apart sooner than expected, so that’s something to factor in when deciding if these boots are right for you.
Caterpillar Men’s Assault Work Boot
When you slip your feet into these Caterpillar boots, you are going to feel like you are wearing a solid, secure, and supportive product.
Something that makes these excellent welder boots is that the ankles have a padded collar, which makes them comfortable. And the fact that you can lace the boots all the way up the front make them nice and snug.
Slip proof rubber soles give you the protection and added traction you need even if you are working in wet conditions. The metatarsal guard of these boots are awesome at protecting you from impact or any minor spillage that might happen.
Made from genuine leather, these boots are not only attractive, but they are also comfortable and durable.
- Slip Resistant
- These are Heavy Boots and Can Feel Cumbersome
- The Eyelets Are Prone to Break Easily
Caterpillar has made a name for itself producing a quality product. These boots are no exception. They are sturdy, attractive, and provide the protection you need while welding.
Rhino Men’s 6MS01 6″ Steel Toe Metatarsal Leather Work Boot
Made from genuine leather, these Rhino men’s steel toe boots are a thing of beauty. Care has been given to the crafting of these boots with the goal of making your footwear experience incredible.
They are designed to protect you from the occupational hazards associated with welding, including slip hazards, electrocution, burning, and falling objects. These are welder boots that are designed to last in even the most rugged conditions.
- At around $60, These Are Some of the Least Expensive Welder Boots We Will Review
- The Outsole Is EH Approved
- These Boots Have an Extra Metatarsal for Added Protection
- The Actual Reinforcement Makes These Boots Heavier Than Others
- The Boot Lacing Can Be Tricky
This is a quality shoe for the price. It is comfortable, and it will last. The only downside is that the laces are little bit brittle, and so they might break easily. It’s not a dealbreaker, but it’s something that you would want to consider. Also, the boot is heavy and can lead to foot fatigue.
Michelin Men’s Steel Toe Metatarsal Guard Boots
Standing at around 5 inches tall and made from rough brown full-grain leather, the Michelin Men’s Steel Toe Metatarsal Guard Boots are among some of the best quality boots you can purchase. They are oil resistant and have a non-marking outsole. They are designed to protect against electrical hazards and provide you with a safe slip resistant walk.
These are comfortable boots. They are built to protect you from impact, heat, and moisture. They are some of the best to welding boots in terms of comfort and performance.
- Leather Design
- Oil Resistant
- Steel Toe
- May Start to Fall Apart after Six Months of Use
Overall, this is a decent shoe for the price range. It is going to provide you adequate protection while you are welding. It is not the highest quality shoe on the market, but it does the job.
Rocky Duty Men’s Modern Paraboot
The first thing you’ll notice when you look at these boots is that they are a lot taller than traditional welding boots. At 10 inches tall, they will also protect the bottom of your leg as well as your feet. This is a good thing, especially when you consider the dangers that lurk in a welding shop.
The unique design makes it easy to put them on and take them off thanks to a side zipper.
The boots look nice because you can polish the water resistant leather to a shine. The boots are resilient, strong, and provide protection.
Their comfort means that even if you stand on your feet all day long, you are not going to feel foot fatigue.
- 10 Inches Tall
- Can Be Polished to a Shine
- Full-Grain Leather Provides Strength and Resilience
- No Metatarsal Guards, so the Top of Your Boots, Including the Laces, Are Not Protected from Burns
- They Do Not Have a Liner, So Your Feet Are Left Feeling Sweaty and Unpleasant
- The Quality of the Boot Has Declined from Previous Models
Although these boots do not have the same quality level as it in the past, they are comfortable, they protect your feet, and they are good for your ankle and lower leg.
Caterpillar Men’s Revolver Pull-On Steel-Toe Boot
These are some stellar boots. Available in men’s sizes from 7 to 14 and blessed with GoodYear welt construction as well as steel toes that have been certified by the ATSM, these are boots that just keep kicking.
There brown pull-up leather boots have a non-slip rubber outsole. They have a thick inner cushioning that keeps your feet comfortable and steady, even when you are on slippery ground. They are designed to protect your feet from bumping into hard surfaces or the impact of falling objects.
These boots offer unparalleled electrical hazard protection.
- Excellent Slip on Workboots
- Goodyear Welt Leather Construction
- Aggressive Tread Pattern for Slip Resistance
- Longer Than Average Break-In
- Rubs against the Ankles
- Sizes Run a Little Larger Than Usual
These are good welders work boots. They hold up well over the years. They require a little bit to break them in, but once are broken in, they are comfortable. They have a good slip resistant tread, so you do not need to worry about slipping on wet surfaces.
KEEN Utility Men’s Milwaukee 6″ Steel Toe Work Boot
Keen has a reputation for building quality, durable yet stylish boots. The Milwaukee six-inch steel toe work boot is no exception. They are comfortable, provide excellent protection, are waterproof, and are durable.
These boots have a slip resistant sole and provide complete electrical hazard protection. It is clear by looking at them to see that these boots were designed to stand up to bad weather. They are able to keep your feet warm if you are working in cool temperatures. One of the pluses of these boots is that they offer you heel protection thanks to an abrasion resistant material that is wrapped around the heel. The soles are puncture resistant and the shoe is water resistant, but it is also breathable.
- Slip Resistant
- Provides Electrical Shock Protection
- Complete Foot Protection
- Some Complain of Them Wearing out after Just A Few Months
- Water Resistant, Not Waterproof
These boots are a good overall construction shoe. While not specifically designed for welding, they will provide some of the basic protection you would expect from welders safety boots.
Dr. Martens Men’s Ironbridge Steel IM Boot
This is an industrial-strength boot. It has a steel toe, it is slip resistant, and it has insulation that is going to protect you from electrical charge.
It is built with water resistant leather and has a welted construction footbed to provide you with additional comfort and stability.
It is designed to wick moisture away from your feet while providing antibacterial protection. It keeps your insole dry and safe.
- Water Resistant Leather Exterior
- Eight High Lace to Toe Closures
- Metallic Fastenings Secure Your Feet Snug in the Boots
- Raised Heel and Tread Give You Additional Height
- These Are Heavy, Clunky Boots
These boot are designed to be comfortable, sturdy, and to protect your feet while on the job. Double stitching prevents them from falling apart at the seams. They are quality boots that will withstand whatever your welding shop throws at them.
As you can see from our brief review, having steel toe welding boots is a must to protect your feet. All it takes is one accident and you are left crippled for the rest of your life.
There is a wide range in prices when it comes to welding boots. You may spend a little bit more money if you’re looking at buying Red Wing welding boots or Timberland pro welding boots, but in both cases, you’re going to get what you pay for.
There are a lot of options available for purchasing boots. You can get them at a brick-and-mortar store, and there’s nothing wrong with that. But there is a lot to be said for purchasing your boots online.
Places like Amazon have a lot of resources that are available to you to make sure that you get the boots that are right for your feet. Not only can you examine the boot in detail, but you can also read reviews and do comparison shopping without any pressure from salespeople who are trying to get you to buy the most expensive shoes so that they can get commission.
Now, the ball is in your court. Do not leave your feet unprotected a moment longer. Buy yourself a nice pair of welders safety boots. Your feet will thank you in the long run.